All

Rhino Hammer™ - SKU: 66130

$299.00

  The Rhino Hammer™ makes removing tabbed parts much easier after they are cut. It uses shop air to create impact vibration that breaks the...

Slat Shield Plus - SKU: 66107

$108.00

  Slat Shield Plus comes in a 5 gallon container. It is a slag/dross preventative that can be applied to new or cleaned slats. Slat...

Magnet Multi Tool MMT - SKU: 66124

$230.00

 Handy tool for removing parts after cutting. Technical Specifications 36" reach 32 lb max pull ultra-high temperature magnet Lever to release parts from magnet Remove...

Slag Removal Tool - SKU: 66101

$95.00

One end of this tool has a slot for prying slag from slats. The other end can adjust the material position in the laser machine...

Magnetic Parts Picker - SKU: 67174

$80.50

Light weight and picks up small light weight parts easily. Uses Pick parts out of a tumbler Pick up loose parts from a nest Technical...

Hand Magnetic Lifter - SKU: 66108

$449.00

Magnetic lifter easily lifts steel parts and pipes from the machine after cutting or welding. Weighs Less Than 4 Lbs., safely holds up to 110 lbs...

Swivel Magnetic Lifter - SKU: 66134

$525.00

Magnetic lifter easily lifts steel parts from the machine after cutting. Weighs less than 4 lbs and lifts up to 220 lbs. Technical Specifications Over 660...

Rhino Hammer™ Tips

$35.00

Tips for the Rhino Hammer™ $35.00 each Quantity discounts available with purchase of 5 or more at a time. To get discount you must click...

Rhino Hammer™ Valve - SKU: 67027

$46.00

Rhino Hammer™ Stem - SKU: 67026

$29.00

3 inches, 15 lbs, 425 degrees - SKU: 66109-3S

$46.75

Lift and remove finished parts from nest. Technical Specifications Easy to lift all flat surface parts Available cup materials for moderate and high temperatures Cup...

4 inches, 25 lbs, 210 degrees - SKU: 66109-4B

$43.25

Lift and remove finished parts from nest. Technical Specifications Easy to lift all flat surface parts Available cup materials for moderate and high temperatures Cup...

4 inches, 25 lbs, 425 degrees - SKU: 66109-4S

$52.75

Lift and remove finished parts from nest. Technical Specifications Easy to lift all flat surface parts Available cup materials for moderate and high temperatures Cup...

3 inches, 15 lbs, 210 degrees - SKU: 66109-3B

$40.25

Lift and remove finished parts from nest. Technical Specifications Easy to lift all flat surface parts Available cup materials for moderate and high temperatures Cup...

Rhino Hammer™ Cap - SKU: 67107

$55.00

Slat Shield Plus Applicator - SKU: 67219

$100.00

The most efficient method for applying Slat Shield Plus to your slats is designed to simplify the process by eliminating the need for manual pumping...

Standard Slaghog® for Lasers up to 12kW (Min Slat Spacing 1.75")

$6,450.00

Quickly and easily remove tough slag and dross buildup from your laser support surface. The Slaghog® works on Copper as well as Steel support slats and can...

Slaghog® HD for Lasers Over 12kW (Min Slat Spacing 1.75")

$6,950.00

Increased torque motor quickly removes tougher slag and dross buildup from the slats on higher powered laser machines. The Slaghog® works on Copper as well as...

Narrow Slaghog® (Min Slat Spacing 1.25")

$6,450.00

Quickly and easily remove tough slag and dross buildup from your laser support surface. The Slaghog® works on Copper as well as Steel support slats and can...

Slaghog® for Plasma

$7,950.00

Introducing the new SLAGHOG™ for PLASMA (SHP) for difficult to remove slag on plasma and oxyfuel slats. The SHP cleans each slat on both sides...

Receptacle - SKU: 67065

$9.18

Head unit receptacle for SH2 & SH3